how to reset skullcandy wireless earbuds

How to Reset Skullcandy Wireless Earbuds & Headphones


Skullcandy headphones and earbuds are made with exciting built-in features that provide excellent sound quality. We have tried some of their series of earphones and headphones, and they have always proved to be the best. Below is the detailed guide on how to reset Skullcandy wireless Earbuds and headphones.

But besides all this, They provide all these premium features at cheap prices. They are equally popular among the young generation because of the diverse style they come in. There may rise some minor connecting issues which don’t really need much technical support but a little reset will do all the work.

How to Reset Skullcandy Wireless Headphones 

Most of the Skullcandy headphones follow the same pattern of reset. Before resetting, you need to follow the necessary required information in order to reset properly.

  1. Your Skullcandy headphones or earphones should not be connected to any of your devices.
  2. You should forget the Skullcandy gadget from your device settings or at least move the Bluetooth connection to some other device to make sure that the connection has been fully disabled.

Now, You are completely set to go to reset Skullcandy wireless headphones

  1. First press and hold the volume up and down buttons. You can find buttons on the right earcup.
  2. LED indicators will flash yellow and the headphones will be fully reset.
How to Reset Skullcandy Wireless Earbuds
Skullcandy headphones

Why Reset Your Skullcandy Headphones?

Resetting your headphones will solve so many issues which don’t exactly require any technical work but a simple reset. Here are some of the issues which you should consider resetting.

  • Audio delay 
  • Static-y sound
  • Connectivity issues
  • Pairing issues
  • Frequent disconnects
  • No sound

How to Reset Bluetooth Headphones According to Brand

You can reset your Bluetooth headphones according to the specific brand you own. It takes some guesswork but definitely, each brand has its own specifications and complexities when there arises any issue.

Here are the different brands you may select among them:

You can check out these articles for further explanation.

How to reset Onn Headphones

How to reset Blackweb Headphones

How to reset MPOW Headphones

How to reset Bose Headphones

How to reset JBL Headphones

How to Reset Skullcandy Wireless Earbuds and Headphones

Different types of Skullcandy Headphones are discussed below.

How To Reset Skullcandy Crusher Headphones

  1. Make sure, your headphone has no connection with any of your device and you completely disconnect Bluetooth or forget the headphones from all devices.
  2. Hold down both buttons for a few seconds and the LED will be flashed yellow.
  3. Headphones are now fully reset.
how to reset Skullcandy wireless headphones
Skullcandy Crusher Headphones

How To Reset Skullcandy Hesh and Riff Headphones

  1. Make sure, your headphone has no connection with any of your device and you completely disconnect Bluetooth or forget the headphones from all devices.
  2. Hold down both buttons for a few seconds and the LED will blink.
  3. Now, you will hear a sound saying ‘pairing.’
  4. Headphones are now fully reset.
how to reset skullcandy earbuds
Skullcandy Hesh and Riff Headphones

How To Reset Skullcandy Wireless Earbuds[Quick Fix]

How to reset IndyTM wireless 

  1. First, forget your IndyTM from your devices.
  2. Make sure that you disconnect Bluetooth from any paired device that you have a connection with.
  3. When you remove it from the case, the right earbud will automatically turn on.
  4. Press the earbuds four times and it will be reset and the red light will be turned on to confirm the process.
  5. Now take the left earbud out from the case and repeat the same process.
  6. You will hear a beep, confirming that the process is all successful.
how to reset bluetooth earbuds
Skullcandy IndyTM wireless 

How to Reset Skullcandy Indy Evo

First, make sure that you disconnect both of your earbuds from all of your devices and there should not be any connection alive so forget the Skullcandy Indy Evo earbuds from all devices.

Follow the instructions below to accurately reset the Skullcandy Indy Evo

  1. Hold both earbuds for a few seconds and turn them off and then again hold them for almost 10 seconds to reset them.
  2. Put them back into the case and the LED will turn red.
  3. Now, pull back the earbuds out of the case. The light will be flashed blue. So one of the earbuds will turn light blue and red indicating that the process was successful.
Why Reset Your Skullcandy Headphones
Skullcandy Indy Evo

How to Reset Skullcandy Sesh

Make sure that you disconnect both of your earbuds from all of your devices and there should not be any connection alive so forget the Skullcandy Sesh earbuds from all devices.

Follow the instructions below to accurately reset the Skullcandy Sesh

  1. Hold both earbuds for a few seconds and turn them off and then again hold them for almost 10 seconds
  2. When you remove it from the case, the right earbud will automatically turn on.
  3. Press the earbuds and it will be reset and the red light will be turned on to confirm the process.
  4. Now take the left earbud out from the case and repeat the same process. Reset will be done.
How to Reset Skullcandy Sesh
Skullcandy Sesh

How To Reset Skullcandy Dime Earbuds

Make sure that you disconnect both of your earbuds from all of your devices and there should not be any connection alive so forget the Skullcandy Sesh earbuds from all devices.

Ensure disconnecting Bluetooth from any paired device that you have a connection with.

  1. Remove earbuds from the case and they will automatically they will be turned on.
  2. Tap one of the earbuds twice and they will hold it down for a few seconds.
  3. Congratulation!  Your resetting is successful.
How To Reset Skullcandy Dime Earbuds
Skullcandy Dime Earbuds

How To Reset PUSHTM Ultra Skullcandy

Make sure that you disconnect both of your earbuds from all of your devices and there should not be any connection alive so forget the Skullcandy Sesh earbuds from all devices.

How To Reset PUSHTM Ultra Skullcandy
PUSHTM Ultra Skullcandy
  1. Press the power button for a few seconds.
  2. They will be turned off. Now restart to reset them.
  3. Press again both buttons and hold the power button for a few seconds.
  4. Put them in the case and they will flash red.
  5. Now pull back both earbuds, they will be powered on and they will flash blue.
  6. When you will pair now with any device, a sound alert will inform you saying ‘paired.’

Similar Posts

One Comment

  1. Pingback: How To Reset JLab Earbuds -

Leave a Reply

Your email address will not be published. Required fields are marked *